Zombie Strike Crossfire Bow Internals!

It's been a while since we had some new content. I ordered some stuff on Amazon, and this came in the other day!

More after the jump.

Perfect (almost) Hammershot Spring Spacer

These came in a while ago and I incorporated one of them into my Hammershot, but haven't had the time to post about it. Well without further delay, here they are:

• Nylon spacer for stock/upgrade Retaliator springs: McMaster
• Nylon spacer for stock Maverick springs: McMaster 

The McMaster spacer shown in Fig. E8.2 is the longer, 1/2 in. length one. These lengthier ones will work perfectly with stock Maverick springs (also shown in the same picture). Whether this spacer will work with the upgrade Maverick springs is untested and unknown. It may be possible to use these spacers with stock/upgrade Retaliator springs. But because the spacer is so long, it becomes very difficult to push the nested springs inside the inner shell spring housing. I seem to recall catch issues with this setup as well, or maybe it is because I thought the blaster will break with the setup that I refrained from this build. The stock/upgrade Retaliator spacer I linked above is 3/8 in. in length. I have not tested this spacer length myself but I am confident that this spacer, along with using a stock Retaliator spring as the outer nest spring will be the perfect build for most people. More specifically, this setup should still be very prime-able with one thumb/hand while maintaining a good balance of power, reliability and durability. If you want to experiment various spacer lengths with various springs, we recommend getting the longer spacers (the ones linked for stock Maverick springs) and shaving them down to the desired length for experimentation/modification.

The pre-made McMasters spacers are pretty much ready to install right out of the box. Here is an example of a completely unmodified McMaster spacer in the Hammershot:
 

Fig. E8.2 - McMaster spacer in Hammershot

The Works Guide: Zombie Strike Hammershot

Table of Contents

A. Introduction
B. Compatibility
C. Tools
D. Parts
E. Modifications
F. Appendix

A. Introduction

Welcome to the Hammershot's edition of The Works Guide. This guide aims to cover modifications to the Nerf Zombie Strike Hammershot. While it is not a complete guide to this relatively new blaster, it will attempt to cover several facets of direct plunger modifications as they apply to the Hammershot.

Read on after the jump...